Air Solenoids

 

Pacbrake offers various vacuum and air solenoid configurations to meet any specialty requirement or mounting location. Our engineered commercial duty and severe-duty solenoids have been through some of the toughest testing grounds the world has to offer.

Pacbrake’s experience designing cost effective hydraulic and pneumatic solenoids with demanding requirements has equipped Pacbrake with the experience to integrate solenoid controls into any application.

SOLENOID OPERATED PNEUMATIC DIRECTIONAL CONTROL VALVES

KEY FEATURES

  • Vacuum and air solenoids
  • 2 and 3 way solenoid configurations
  • Stackable applications available
  • 12 and 24 volt solenoids rated for automotive use
  • Severe-duty applications

 

3-WAY, 2-POSITION PNEUMATIC SOLENOIDS
C11935

KEY FEATURES

  • Voltage Range: 12 VDC
  • Coil Resistance: 10 Ω
  • ‘IN’ port normally closed
  • CYL’ port normally open to exhaust (atmosphere)
  • 18″ [457 mm] long 18 AWG wire lead length
  • Anodized aluminum valve body
  • Zinc chromate plated carbon steel solenoid body

C11979

KEY FEATURES

  • Voltage Range: 24 VDC
  • Coil Resistance: 50 Ω
  • ‘IN’ port normally closed
  • CYL’ port normally open to exhaust (atmosphere)
  • 18″ [457 mm] long 18 AWG wire lead length
  • Anodized aluminum valve body
  • Zinc chromate plated carbon steel solenoid body

 
4-WAY, 2-POSITION – LIGHT DUTY SOLENOIDS
C11829

KEY FEATURES

  • Voltage Range: 12 VDC
  • Coil Resistance: 25 Ω
  • Max Power: 6 Watt
  • 0.5 Amps current holding
  • Spring return with flush non-locking override
  • 1/8″ (-2) NPTF
  • Lubricant free assembly
  • Loctite applied to fasteners
  • Energize time: 0.012 ms
  • De-energize time: 0.006 sec
  • Designed to meet NEMA 4 / IP65
  • Flow capacity: 197 NI / m @ 6 bar upstream / 5 bar downstream [9.3 SCM @ 80 psig upstream / atmosphere downstream]
  • 15″ [457 mm] long 18 AWG pigtail

 
3-WAY, 2-POSITION – HEAVY DUTY SOLENOIDS
C10611

KEY FEATURES

  • Voltage Range: 24 VDC
  • Coil Resistance: 36 to 45 Ω
  • Max Power: 14 Watts
  • Direct acting, spring return
  • Inlet – normally closed, Cyl – normally open to vent (atmosphere)
  • Spring return with flush non-locking override
  • 1/4″ (-4) NPTF IN and CYL port
  • 6″ [152 mm] long 18 AWG ( UL 3173) pigtail
  • Brass solenoid base
  • Zinc chromate plated carbon steel solenoid body
  • N4006 internal suppression diode
  • NEMA 1 Protection


 

 

 

Connect with Pacbrake
CONTACT